Arama
  • banner pc

    Huawei OptiXaccess EA5801E-FL16

    Compact and low-density box-shaped OLT.

Overview

  • Overview
  • Features
  • Specifications
Huawei OptiXaccess EA5801E-FL16

Huawei OptiXaccess EA5801E-FL16

Huawei OptixXaccess EA5801E-FL16 is a compact and High-density box-shaped OLT. It provides Flex-PON access, and supports passive optical LAN (POL) and fiber to the home (FTTH) solutions. It carries all services over one fiber network, simplifying network architecture and reducing OPEX.

Continuous Security

High reliability

Dual AC/DC power supplies.
Type B/C quick switchover.

Flexible Installation

Easy installation

Light weight and small size.
Flexibly adapted to various installation scenarios.

Smooth Evolution

Smooth evolution

3-in-1 Flex-PON board.
Easily upgrade from GPON to 10G PON.

Specifications

Parameters Huawei OptiXaccess EA5801E-FL16
Dimensions (W x D x H) (mm) Excluding mounting ears: 442 x 220 x 43.6
Including IEC mounting ears: 482.6 x 220 x 43.6
Including ETSI mounting ears: 535 x 220 x 43.6
Maximum fully-loaded weight 5 kg
Power supply mode • DC power supply (dual backup)
• AC power supply (dual backup)
Working voltage range • DC power supply: –38.4 V to –72 V
• AC power supply: 100–240 V
Rated voltage • DC power supply: –48 V/–60 V
• AC power supply: 110 V/ 220V
Maximum input current • DC power supply: 6 A
• AC power supply: 2.5 A
Ambient temperature –40°C to +65°C
The device can start up at a lowest temperature of –25°C.

NOTE
The +65°C temperature refers to the highest temperature measured at the air intake vent of a service subrack.
Ambient humidity 5%–95% RH
Atmospheric pressure 70–106 kPa
Altitude < 4000 m. The air density varies with the altitude and will affect the heat dissipation of a device. Therefore, the working environment temperature of the device varies with the altitude.
System switching capacity 240 Gbit/s
MAC addresses 32768
Access ONT 2048
IPv4 routing table 8192
IPv6 routing table 4096
ARP table 16384
Bit error rate (BER) in full load When FEC is enabled, the GPON BER is less than 10 e-10, and the XG(S)-PON BER is less than 10 e-12.
10GE/GE upstream ports 4 GE/10GE
Service ports 16 Flex-PON
System reliability specifications System availability for the typical configuration: > 99.999%
Mean time between failures (MTBF): about 45 years

NOTE
Due to different network environments and different boards used by devices, the preceding MTBF (45 years) of the EA5801E is only for reference. The preceding values are only for reference. For details, contact the related Huawei engineers.
Power consumption DC power supply:
• Static power consumption: 72W
• Typical power consumption: 127W
• Maximum power consumption: 228W
AC power supply:
• Static power consumption: 73W
• Typical power consumption: 128W
• Maximum power consumption: 229W

NOTE
The power consumption of a product is tested in the following conditions:
• Static power consumption: 25°C, no optical module in optical ports, and no service.
• Typical power consumption: 25°C, 4 x 10GE(10kM) upstream ports, 16 x Flex-PON(XGS Combo C+) ports on the user side, full services, and maximum traffic.
• Maximum power consumption: 65°C, 4 x 10GE(10kM) upstream ports, 16 x Flex-PON(XGS Combo C+) ports on the user side, full services, and maximum traffic.

TOP